2W100-10S 2-way 2-position unidirectional water/air general stainless steel solenoid valveTechnicial Detail
●Mode of Operation:Normally Closed
●Pipe Size: 3/8"
●Body Material:Stainless Steel
●Seal Material: NBR or Viton
●Pressure Range: 0-7Bar
●Flow Rate: 1.6
|●Coil Type: D type
●Coil Class: F Class
●Duty Cycle: 100% but not indefinitely
●Suitable Media: Water, Air, Oil
Related Solenoid Valve
Our 2W100-10S is a 2-way 2-position unidirectional water/air general solenoid valve that’s normal position is closed. This means the valve has an inlet port, outlet port and flow is constant in one direction. The thread size is NPT 3/8" or BSP(G) 3/8". The orifice size is 10mm with a Cv of 0.6.The valve will remain in the closed position until coil energised, holding the position until the power state is changed. This valve has a 304 Stainless Steel body that is suitable for potable water as well as many other types of fluids and chemicals..
This valve has a working pressure range from 0 – 7 Bar for water and air, from 0-5 Bar for the oil. It is an ideal drain valve for gravity fed liquid. The media temperature can range as low as -5°C and up to 80°C. Higher or lower temperatures may prevent the valve from performing or even damage it.
There are 4 types coils to choose. The voltage has AC220V, AC110V, DC24V and DC12V. It will operate within a voltage range of +-10%. This norlam model comes with a 43650B DIN connector that is pre-wired for quick connection. This coil is not water proof and should not be installed in spray down locations.