2 Inch Stainless Steel Solenoid Valve

2 Inch Stainless Steel Solenoid Valve
  • 2 Inch Stainless Steel Solenoid Valve
  • 2 Inch Stainless Steel Solenoid Valve
  • 2 Inch Stainless Steel Solenoid Valve

China 2 Inch Water Electric Stainless Steel Solenoid Valve for water AC220V

  • Product No.: 2W500-10S Normally Closed
  • Pressure: 0-7Bar
  • Pipe Size: 2
  • Medium temperature: -5-80℃
  • Mode of action: Direct Acting
  • Medium: Water, Air, Gas, Liquid


2 Inch Stainless Steel Solenoid Valves for Water

Technicial Detail
●Part Number:2W500-50S
●Mode of Operation:Normally Closed
●Pipe Size: 2"
●Body Material:Stainless Steel
●Components:Stainless Steel
●Seal Material: NBR or Viton
●Temperature Range:-5-80°C
●Pressure Range: 0-7Bar
●Flow Rate:48

●Coil Type: Wire Lead
●Coil Class: F Class
●Response Time: Less than 1 second
●Duty Cycle: 100% but not indefinitely
●Suitable Media: Water, Air, Oil, Gas
●Weight:  4.5KG

vacuum solenoid valve
The 2W500-50S is 2" inch brass small series solenoid valve. It's two way two position direct acting diaphragm electric solenoid valve with available voltage AC220V, AV110V, DC24V and DC12V. It can be used for liquid , air, water, gas in a variety of different applications. This valve uses NBR or Viton seal material that is compatible with many liquid such as water up to 80°C. The valve is normally closed, closed when de-energized and open when energized. It is capable of operating at zero differential pressure. This compact solenoid features with female BSP 2" thread or NPT 2" thread.  
The 2W500-50S electric valve has four coil with voltage AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a wire lead connection that can easily be connected with your own choice of terminals. This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Non-applicable fluid
When the temperature is high, it is liquid, and solid when cooled; Corrsive Fluid; Fluid above 20 cst concentration.
The impurities in the line must be cleaned first before installation. In order to prolong service life, Y filter should be installed on the front end of solenoid valve.



  • * (All * must be filled in)

Related Products